Call us Toll Free (877) 595-2040

18" Flexible PVC Ramp Edges without Loops

18" Flexible PVC Ramp Edges without Loops

Availability: In stock

$2.99

* Required Fields

BlockTile

Details

Details

Ramp Edges WITHOUT Loops (Flexible PVC)

There are two types of flexible PVC edges for Floor Junkies’ 18-inch Flexible PVC interlocking floor tiles: Ramp Edges WITH Loops and Ramp Edges WITHOUT Loops. These names refer to the loop-to-peg interlocking system on the long side of the Ramp Edge. Given that the tiles are modular by nature, there is no right or wrong decision with your selection of either type of edge for your installation. However, is it advised for you to consider your selection depending on how you start your installation and the type of room in which you are installing the interlocking floor tiles.

  • 18” x 3-1/4” x 1/4"
  • Professional-Grade Flexible PVC Material
  • 6 Pegs
  • Available in Multiple Colors
  • Low Noise Surface
  • Slip Resistant
  • High-Impact Resistant
  • High-Load Resistant
  • Full UV Protection
  • Anti-Microbial Finish
  • Made for 18” x 18” Flexible PVC interlocking tiles
  • Made in the USA

Wall-to-Wall Installation

If you decide to begin your installation towards the backend of your room, then Ramp Edges WITHOUT Loops would be required.  When used in a garage installation, this option is not necessarily recommended unless your garage is a compact, one-car garage. For installations that start at a corner in the back of the garage, the floor tiles should be oriented with the loops pointing toward the entrance, mirroring the corner from which you are beginning your installation. For home gym indoor installations, edges are usually not necessary.

Sectional Garage Installation

In the case that you are creating a floor mat, you will need both types of Ramp Edges, plus Corners Pieces. Let’s say for instance, you need your floor mat to be 18’ x 30’. To find out how many inches is in 18’ and 30’, you multiply 18’ and 30’ by 12 (inches per foot), thus being 216” and 360”. You then divide the total amounts of inches by 18 (inches per edge), so 216 / 18 = 12 and 360 / 18 = 20. Therefore, you would need 12 Ramp Edges WITH Loops for the length and 20 Ramp Edges with WITHOUT Loops for the width on BOTH sides of your floor mat. Of course, you will also need 4 Corner Pieces for each point of the mat. During this process, it is important to keep in mind that two adjacent sides of the floor mat will have loops and the other two sides will not have loops.

Other Ramp Edge Uses

Although the Ramp Edges are optional to use alongside the interlocking tiles, it is recommended. Since the Flexible PVC interlocking tiles are 1/4-in tall, the transition from the subfloor to the top of the actual tiles could potentially cause one to trip. The Ramp Edges, however, create a smooth, inclined slope to better ease walking or driving over them. Combined with the Corner Pieces, the Ramp Edges provide that finished, high-quality appeal your floor needs.

Additional Info

Additional Info

SKU F0US
Country of Manufacture United States
Condition New
Material Flexible PVC
Floor Texture Flat Textured Top
Size 18" x 3-1/4" x 1/4" - Ramped
Package Quantity No
Coverage 18" Linear
Applications Commercial Display, Garage, Garage Entrance , Garage Mat Border, Home Gym, Tile Accessory, Trade Show

Reviews

Write Your Own Review

You're reviewing: 18" Flexible PVC Ramp Edges without Loops

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)